Configuring the transmitters for your Tourguide application

SKM

SKP

SK

Configuring the transmitters for your Tourguide application

Please also read the instruction manual for your transmitter. It provides important information that ensures safe and optimum operation of the transmitter in your Tourguide application.

Matching the transmitter to the receiver

To be able to establish a transmission link, the transmitter and receiver used must operate in compatible frequency ranges (see page 4) and must be set to the same frequency.

Make sure that the desired frequencies are approved and legal in your country and, if necessary, apply for an operating license.

You can contact your Sennheiser partner who will be pleased to calculate intermodulation-free frequencies for you or to help you apply for an operating license.

The receiver’s channels have been factory-preset to receiving frequencies that are intermodulation-free (see frequency table on page 27). However, you can change the factory-preset frequencies. Within one frequency range, up to 32 transmission links can be operated simultaneously.

￿Make sure to set the transmitter of the evolution wireless G3 or 2000 series to the same frequency as the receiver.

If you still cannot establish a transmission link between transmitter and receiver, read the chapter “If a problem occurs ...” on page 23.

Configuring the mobile SK, SKM and SKP transmitters

1.Set the frequency that you want to use for your Tourguide application (“Tune” menu item).

2.Adjust the input sensitivity of the microphone (“Sensitivity” menu item; for

presentation applications, the guide values range from approx. –21 dB to 0 dB).

SR

531.375

 

516.000

516.000

516.000

Configuring the stationary SR monitoring transmitter

1.Set the frequency that you want to use for your Tourguide application (“Tune” menu item).

2.Set the transmitter to mono operation to avoid interference during RF trans- mission (“Mode” menu item).

3.Adjust the input sensitivity of the transmitter (“Sensitivity” menu item; for

presentation applications, the guide values range from approx. –21 dB to 0 dB).

22 Tourguide 1039