Sennheiser 830 S Putting the Set 830 S into operation, Setting up the transmitter

Putting the Set 830 S into operation

Setting up the transmitter

Place the transmitter so that:

–there are no obstacles in the light path between trans- mitter and receiver and

–transmitter and receiver are not exposed to direct sun- light. Direct sunlight may interfere with the reception and may damage the transmitter.

If you are using a plasma TV screen:

Plasma TV screens radiate an infra-red signal that can adversely affect the transmission quality.

Make sure that the transmitter is placed as far as pos- sible from your plasma TV screen.

If necessary, use a standard extension cable (3.5 mm stereo jack plug) to reduce the distance between trans- mitter and receiver. This extension cable is available from your Sennheiser dealer.

Note:

One transmitter can be used to transmit to several receivers on the same frequency.