Putting the Set 830 S into operation
AConnecting the transmitter to a headphone socket
| Plug the other end of the connec- |
J | tion cable I into the |
I | socket on your sound source. |
Is the plug on the connection cable too small for the headphone socket?
Plug the adapter to ¼” (6.3 mm) jack socket J onto the connection cable I.
Adjust the volume of the headphone socket on your sound source to a medium level.
This improves the quality of cordless sound transmission. For detailed information, please refer to the instruction manual of your sound source (e.g. TV).
Note:
With most TVs, the headphone socket is located at the front or sides.
BConnecting the transmitter to an RCA socket
K
Note:
Plug the adapter for RCA socket K onto the connection
Icable I.
Connect the red connector of
the adapter K to the red RCA socket R of your sound source.
Connect the white connector of the adapter K to the white or black RCA socket L of your sound source.
With most TVs, the RCA socket is located at the rear.
8