Using the Set 830 S
Searching for a sound source
Switch the receiver on.
Do you hear the desired sound source?
Yes: The receiver has already found the sound source.
1 5 | No: |
| |
Briefly press | the channel search | ||
| |||
| button 5. |
| |
| The sound source is searched for. | ||
| On the receiver, the channel indi- | ||
| cator 1 can light up as follows: | ||
Channel | Frequency | You hear | |
indicator |
| the sound in | |
| 2.3+2.8 MHz | stereo | |
| 2.3 MHz | mono | |
| 2.8 MHz | ||
|
|
If you still haven’t found your sound source, press the channel search button once more.
You cannot find your sound source?
Read the chapter “If a problem occurs ...” on page 23.
Note:
The channel indicator goes off after 30 seconds so that the light won’t disturb you in a dark room.
Adjusting the balance
4The balance control allows for right/left volume adjustment. Adjust the balance
so that you hear equally well with both ears.
Turn the balance control 4 to the
left L or right R in order to increase the volume for the corresponding ear.
15