Sennheiser AC2 manual Connecting the transmitters, Connecting the antenna, through the cable grips

Connecting the transmitters

You can connect up to four SR 300 IEM G2 transmitters to the combiner. The combiner incorporates DC distribution for powering the transmitters.

￿Pass the cables coming from the combiner’s DC outputs

through the cable grips at the rear of the transmitters.

￿Insert the hollow jack plugs into the sockets of the transmitters.

Connecting the antenna

The combiner combines the transmission signals of up to four transmitters onto a single antenna.

￿Connect the BNC cables of the combiner to the BNC sockets of the transmitters.

￿Connect the telescopic antenna of one of the transmitters

to the BNC socket of the combiner.

￿Pull the end cap to extend the telescopic antenna and align it upwards.

￿When rack-mounting the combiner, the telescopic antenna can be connected to the front of the GA 2 rack adapter by using the AM 2 antenna mount (optional accessory).

Use a remote antenna (optional accessory) when the combi- ner position is not the best antenna position for optimum transmission.

16