Putting the ASA 1 into operation

 

￿ When rack mounting, please note that intrinsically harmless

 

leakage currents of the individual mains units may

 

accumulate, thereby exceeding the allowable limit value. As

 

a remedy, ground the rack via an additional ground

 

connection.

 

For rack mounting the ASA 1, you require (see “Accessories and

 

spare parts” on page 17):

 

• the GA 3 19“ rack adapter

Rack mounting

￿ Unscrew and remove the two recessed head screws (M4x8)

one ASA 1

on one side of the ASA 1.

 

 



 

 

 

￿ Hold one rack mount “ear” to the ASA 1.

 

￿ Secure the rack mount “ear” to the side of the ASA 1

 

using the two recessed head screws.

 

￿ Repeat for the other rack mount “ear” as described above.

 

￿ Secure the blanking plate to one of the rack mount

 

“ears” using two recessed head screws (M 6x10).

If you do not want to front mount the antennas:

￿Insert the two blanking plugs  into the holes of the blanking plate.

9