Putting the ASA 1 into operation

Rack mounting

￿ Place the two devices (e.g. the ASA 1 and a stationary

two devices into

receiver) side by side upside-down onto a flat surface:

the same 19” slot

 

 



￿Secure the jointing plate  to the devices using six recessed head screws (M 3x6).

￿Secure the rack mount “ears” to the devices as described in the section “Rack mounting one ASA 1” on page 9.

To mount the antennas:

￿Use remote antennas.

To mount the devices into the rack:

￿Slide the devices into the 19” rack.

￿Secure the rack mount “ears” to the 19” rack.

11