Putting the ASA 1 into operation
| Putting the ASA 1 into operation |
| Preparing the ASA 1 for use |
| For |
| Do not fit the device feet when mounting the ASA 1 into a |
| 19” rack. |
|
|
CAUTION! | Risk of staining of surfaces! |
Some surfaces have been treated with varnish, polish or synthetics which might cause stains when they come into contact with other synthetics. Despite a thorough testing of the synthetics used by us, we cannot rule out the possibility of staining.
Do not place the ASA 1 on delicate surfaces.
Ensure that the base of the ASA 1 is clean and free from grease before fitting the device feet.
Fix the device feet to the base of the ASA 1 by peeling off the backing paper and fitting them as shown on the left.
Place the ASA 1 on a flat, horizontal surface.
Fastening the stacking elements (see “Accessories and spare parts” on page 17)
The stacking elements are designed to help protect the operating elements from damage or deformation, e.g. if the ASA 1 is dropped.
To fasten the stacking elements:
Unscrew and remove the four recessed head screws (M4x8).
Secure the stacking elements to the ASA 1.
7