12
Product overviews
Operating elements of the SK D1 bodypack transmitter
1
2345
8
9
6
7
7
1ON/OFF button Short-press to switch the bodypack transmitter on.
Long-press to switch the bodypack transmitter off (for details, see page 26).
2 3.5 mm jack socket
Mic/Line
for connecting the clip-on or headset microphone
3Status LED lights up green: A radio link to the receiver is established. The batteries of the bodypack trans-
mitter are sufficiently charged.
flashes green:
The PAIR button has been short-pressed. Paired devices are being identified
(for details, see page 29).
flashes alternately
green and red:
The PAIR button has been long-pressed. The bodypack transmitter establishes
a radio link to a receiver whose PAIR button has also been long-pressed (for
details, see page 28).
lights up yellow: The bodypack transmitter has been muted with the MUTE switch. In addition,
Muted is displayed on the display panel (for details, see page 28).
flashes red:
The battery capacity of the bodypack transmitter is only sufficient for approx.
30 minutes of operation.
lights up red: No radio link to a receiver. In addition, No Link is displayed on the display
panel.
4MUTE switch for muting the bodypack transmitter (for details, see page 28)
5Antenna Do not touch the antenna during transmission to avoid a reduction in
the transmission range.
6Display panel For details, see page 13.
7Catches Press simultaneously to release the battery box or the accupack.
8PAIR button Short-press to identify the paired receiver (see page 29).
Long-press to change the pairing (see page 28).
9Belt clip For details, see page 22.