40
Using the products
왘Open the Device tab.
The app automatically detects all receivers in the network and reads their
settings and firmware version.
If a newer firmware is available, Update Available appears on the screen
and the Update button becomes active. If the firmware is up-to-date,
Current is shown instead.
왘Tap on the Update button.
A progress bar appears on the receiver display panel while the new firm-
ware is being downloaded and transferred to the receiver via the network.
Then Finalising and a new progress bar appear on the receiver display
panel while the firmware is being installed. Finally, the receiver restarts.
The app displays the new firmware version. Update Available and the
Update button disappear from the screen.
Updating the receiver firmware
using the “Sennheiser D1 SL Updater”
software
To update the firmware using the “Sennheiser D1 SL Updater” software:
왘Connect all receivers to a router or switch as described on page 20.
왘Use an Ethernet cable to connect a computer to this router or switch. The
connected computer requires Windows 7 or higher (32 or 64 bit) and Inter-
net access.
왘Install the “Sennheiser D1 SL Updater” software on the computer. The soft-
ware can be downloaded from the following URL: www.sennheiser.com/
D1-app.
왘Start the software.
The software automatically detects all receivers in the network and reads
their firmware version.
You can update the firmware of several receivers simultaneously by
simply going to the next receiver in the app and then tapping the
Update button on the Device tab.
If Internet access cannot be guaranteed at all times and in all loca-
tions:
왘Download the firmware file in advance via the Sennheiser
Downloadarea and save it, for example, on a USB flash drive.