Adjusting settings via the operating menu

Scanning for, releasing and selecting frequency presets – “Easy Setup”

Menu item

Function of the menu item

Reset List

Releases all locked frequency presets

 

 

Current List

Selects an unused frequency preset

 

 

Scan New List Automatically scans for unused receiving frequencies (frequency preset scan)

If receiving frequencies are used, they will be locked; if receiving frequencies are unused, they will be released.

After the frequency preset scan, you can select an unused frequency preset.

Selecting the frequency bank and the channel – “Frequency Preset”

SET

Frequency Preset

SET

Menu

Frequency Preset

 

Frequency Preset

 

 

B.Ch:

1.

1

 

B.Ch: 6.

3

 

 

 

 

 

 

 

B.Ch: 1. 1

 

 

 

863.100MHz

 

824.500MHz

Call up “Frequency

 

Select the frequency

 

Select the channel;

Preset”

 

bank and confirm

 

store the setting

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

“Stored”

 

SET

 

 

 

 

 

 

 

 

 

 

When setting up multi-channel systems, please observe the following:

Only the factory-preset receiving frequencies within one frequency bank (“1” to “20”) are intermodulation-free. It is vital to observe the notes on frequency selection on page 20.

Overview of the frequency banks and channels:

Frequency bank

Channels

Type

 

 

 

“1” to “20”

up to 16 per

System bank:

 

frequency bank

frequencies are factory-preset

 

 

 

“U1” to “U6”

up to 16 per

User bank:

 

frequency bank

frequencies are freely selectable

 

 

 

Entering a name – “Name”

Menu

Name

Name

Name

Lichael

Michael

Lichael

 

 

Call up “Name”

Enter a character

Enter a character;

 

and confirm

store the setting

“Stored”

Via the “Name” menu item, you can enter a freely selectable name (e.g. the name of the performer) for the receiver. The name is displayed on the “Frequency/Name” standard display (see page 10). The name can consist of up to 8 characters such as:

•letters (without pronounciation marks),

•numbers from 0 to 9,

•special characters and spaces.

To enter a name, proceed as follows:

￿ Press the rocker button to select a character.

SET ￿ Press the SET button to change to the next segment/character or to store the complete entry.

15