Putting the diversity receiver into operation
Putting the diversity receiver into operation
Inserting the batteries/accupack
For powering the diversity receiver, you can either use two 1.5 V AA size batteries or the rechargeable Sennheiser BA 2015 accupack (see “Accesso- ries” on page 24).
Open the battery compartment by pushing the two catches in the direction of the arrows and open the cover .
Insert the two batteries or the accupack as shown above. Please observe correct polarity when inserting the batteries/accupack.
Close the battery compartment by pressing on the center of the cover .
The battery compartment cover locks into place with an audible click.
Charging the accupack
To charge the BA 2015 accupack:
Insert the diversity receiver into the L 2015 charger (see “Accessories” on page 24).
The L 2015 charger can only charge the combination BA 2015 accupack/diversity receiver. Standard batteries (primary cells) or individual rechargeable battery cells cannot be charged.
Connecting the earphones
Connect the earphones to the socket .
The ground connection of the earphones cable serves as the antenna for the second diversity section. For details on the connector assignment, refer to the diagram on page 25.
7