Sennheiser EK 300 IEM The extended menu “Advanced Menu”

Press the rocker button until the “Tune” menu item appears.

Adjusting settings via the operating menu

The extended menu “Advanced Menu”

To get into the extended menu “Advanced Menu”:

From the main menu, select “Advanced”.

Setting the receiving frequencies and the frequency banks “U1” to “U6 – “Tune”

When you have selected one of the system banks and then select the “Tune” menu, the diversity receiver automatically switches to channel 1 of the frequency bank “U1”. In this case, “U1.1” briefly appears on the display panel.

Upon delivery, the channels of the frequency banks “U1” to “U6” are not assigned a receiving frequency.

Via the “Tune” menu item, you can set a receiving frequency to be stored in the current channel or you can select a different channel in one of the frequency banks “U1” to “U6” and assign this channel a receiving frequency.

Setting a receiving frequency for the current channel

Press the rocker button until the “Tune” menu item appears.

SET

Press the SET button.

The MHz section of the receiving frequency of the channel is

highlighted.

SET

Tu n e

SET

Advanced Menu

Tune

823

.925 MHz

823.

925

MHz

823.925 MHz

B.Ch: U1. 1

Call up “Tune”

Select the frequency

Select the channel;

(special function)

bank and confirm

store the setting

“Stored”SET

It is vital to observe the notes on frequency selection on page 20.

SET

Press the rocker button to set the MHz section of the frequency.

Press the SET button to confirm the MHz section of the frequency.

The kHz section of the frequency is highlighted.

Press the rocker button to set the kHz section of the frequency.

Press the SET button to confirm the frequency.

“Stored” appears on the display panel. The “Tune” menu item appears again.

Selecting a channel and assigning this channel a frequency

SET

Press the SET button and keep it pressed until the frequency

bank is highlighted.