Putting the RS 180 into operation
A | Connecting the transmitter to a headphone socket | ||
Depending on your sound source, you have to change the setting of the | |||
| |||
| ATTENUATOR switch in order to optimally adjust the signal of the sound | ||
| source. |
| |
| Portable sound source | Stationary sound source | |
| (MP3 player, mobile telephone) | ||
| Set the ATTENUATOR switch Set the ATTENUATOR switch | ||
| to “0 dB”. | to |
Adjust the volume of the headphone socket on your sound source to a medium level. This improves the quality of wireless sound transmission. If necessary, check the settings of your sound source.
Connect the audio cable to the headphone socket of your sound source.
If the plug on the audio cable is too small for your headphone socket, plug the adapter to ¼“ (6.3 mm) jack plug onto the audio cable.
A
0
7
13