1s

5s

Using the RS 180

Switching the headphones on and off

WARNING Danger due to high volumes!

Listening at high volume levels for long periods can lead to permanent hearing defects.

￿Before putting the headphones on, set the volume to a low level.

￿Do not continuously expose yourself to high volumes.

Switching the headphones on

￿Press the multi-function button ￿ for approx. 1 second.

The headphones switch on. The multi-function LED ￿ flashes green, indicating that the headphones are in enrollment mode.

Once the headphones have found a suitable transmitter, the transmitter pairs with the headphones and transmits an audio signal. The multi-function LED ￿ of the headphones and the multi-function button ￿ of the transmitter flash slowly.

￿

3

Switching the headphones off

￿Press the multi-function button ￿ for approx. 1 second.

The multi-function LED ￿ goes off. The headphones are in standby mode.

If there is no signal from the transmitter for more than 5 minutes, the headphones automatically switch to standby mode.

21