Sennheiser IAS-MO 2000 manual Connecting the mains unit, Connecting the amplifier

To mount two central units into a rack:

9￿ Place the two central units side by side upside-down onto a flat surface.

		￿ Align the jointing plate	over the holes in the bottom sides of the central
		units.
		￿ Secure the jointing plate	to the central units using eight of the supplied
9		recessed head screws (M 3x6).
	0	￿ Hook the two rack mount “ears” the front panels of the central units.
		￿ Secure the rack mount “ears” to the central units using two of the sup-
		plied recessed head screws (M 3x6) respectively.

￿ Slide the central units into the 19” rack.

￿Secure the rack mount “ears” to the rack.

	To mount only one central unit into a rack:
8	￿ Hook the two rack mount “ears” to the front panel of the central unit.
9	￿ Secure the rack mount “ears” to the central unit using two of the supplied
9	recessed head screws (M 3x6) respectively.

A	￿ Secure the blanking plate	to one of the rack mount “ears”	using two
	of the supplied recessed head screws (M 6x10).

￿ If you are not front mounting the BNC output connector, insert the two blanking plugs into the holes of the blanking plate.

￿Slide the central unit into the 19” rack.

￿Secure the rack mount “ears” to the rack.

AF OUT

BAL/UNBAL

DC IN	LEV 6dBu MAX
12V/150mA

Connecting the mains unit

￿ Connect the supplied mains unit to the socket (DC IN). Use the cable grip to secure the power supply DC cable.

￿ Connect the suitable adapter to the mains unit .

￿ Connect the mains unit to the mains. The device switches on automatically.

AF OUT

BAL/UNBAL

DC IN	LEV 6dBu MAX
12V/150mA

Connecting the amplifier

The audio outputs are available as a balanced XLR-3M output and an unbalanced BNC output , allowing you to simultaneously connect two devices (amplifier, etc.). Both outputs deliver the same output voltage, are short-circuit proof and decoupled from each other.

￿Connect the amplifier/mixing console to the balanced XLR-3M output

or the unbalanced BNC output .

For details on balanced or unbalanced connection, see “Connector assign- ment” on page 15.

8