8 | 9 | 0 |
A |
Putting the system into operation
CAUTION! Risk of staining of furniture surfaces!
Some furniture surfaces have been treated with varnish, polish or synthetics which might cause stains when they come into contact with other synthetics. Despite a thorough testing of the synthetics used by us, we cannot rule out the possibility of staining.
Do not place the central unit on delicate furniture surfaces.
You can set up the device on an even surface or mount it into a 19” rack.
Note:
Do not fit the rubber feet when rack mounting the device.
Setting up the device
To ensure that the device cannot slip on the surface on which it is placed, fix the supplied four
Ensure that the base of the device is clean and free from grease before fitting the rubber feet.
Fix the rubber feet to the base of the device by peeling off the backing paper and fitting them as shown.
Rack mounting
CAUTION! Danger of heat damage!
When installing the device in a closed or
Make sure not to affect the ventilation required for safe operation or provide additional ventilation.
CAUTION! Danger of electric shock!
When installing the device in a closed or
Ground the rack via an additional ground connection.
For mounting two central units into a 19” rack, you require the GA 2 rack adapter. The GA 2 rack adapter consists of:
y1 blanking plate
y2 rack mount “ears”
y1 jointing plate
y 2 blanking plugs for closing off unused BNC holes
y12 recessed head screws M 3x6
y2 recessed head screws M 6x10
7
