Ricoh GR Digital II manual Switching from Jpeg to RAW Mode Jpegraw

Switching from JPEG to RAW Mode (JPEG>RAW)

Assigning the Fn (Function) button to [JPEG>RAW] (GP.164) and then pressing the Fn button when a [Pic Quality/Size] setting other than a RAW setting is selected (GP.91) allows you to switch to RAW mode with the same image ratio. Pressing the Fn button again returns to JPEG mode.

[Pic Quality/Size] setting	Pressing the Fn button
F3648(10M)/N3648(10M)/N3264(8M)/	Switches between RAW(10M) and the
N2592(5M)/N2048(3M)/N1280(1M)/N640 (VGA)	original [Pic Quality/Size] setting
F3:2(9M)/N3:2(9M)	Switches between RAW3:2(9M) and the
	original [Pic Quality/Size] setting
F1:1(7M)/N1:1(7M)	Switches between RAW1:1(7M) and the
	original [Pic Quality/Size] setting
RAW(10M)/RAW3:2(9M)/RAW1:1(7M)	Does not operate

1Set [Function Button] to [JPEG>RAW] on the setup menu.

•For the operating procedure, see P.164.

2With the camera ready to shoot, press the Fn button.

•The camera switches to RAW mode with the same image ratio and [RAW] is displayed in orange on the screen.

•Pressing the Fn button again returns to JPEG mode.

1

Various Shooting Functions

Caution------------------------------------------------------------------------------------------

Pressing the Fn button does not switch to JPEG mode in the following cases.

•[Pic Quality/Size] is set to RAW mode (GP.91)

•[Continuous Mode] is set to a setting other than [Off] (GP.99)

•[Auto Bracket] is set to a setting other than [Off] (GP.110)

Note ----------------------------------------------------------------------------------------------

•Turning the camera off or changing the [Function Button] setting after switching to RAW mode returns the setting to JPEG mode.

•When shooting in RAW mode, see the notes on P.92.

• You can also use the shooting menu to switch between JPEG and RAW mode. (GP.91) 75