Ricoh GR Digital II manual 173, Changing the Level Confirmation Setting Level Setting

Changing the Level Confirmation Setting (Level Setting)

When [Level Setting] is set to on, the camera uses a level indicator and sounds to let you know whether the image is level during shooting. You can select from the following level confirmation settings. For information on how to use the level function during shooting, see P.59.

Available Settings	Description
Off	The level indicator does not appear on the screen and the level
*Default setting	sensor sound is not emitted.
Display	The level indicator appears on the screen, but the level sensor
	sound is not emitted.
Disp + Snd	The level indicator appears on the screen and a level sensor
	sound is emitted when the camera is level.
Sound	The level indicator does not appears on the screen, but a level
	sensor sound is emitted when the camera is level.

1Display the setup menu.

•For the operating procedure, see P.156.

•You can also press and hold the DISP. button in shooting mode to display the setting menu. If you pressed and held the DISP. button, skip to Step 3.

2Press the " button to select [Level Setting] and press the $ button.

3Press the !" buttons to select the desired setting.

4Press the MENU/OK button, or press the # button and then the MENU/OK button.

Note ----------------------------------------------------------------------------------------------

•For information on how to use the level function during shooting, see P.59.

•The level function is not available when recording movies or during interval shooting.

•The level sensor sound is not emitted, even when [Level Setting] is set to [Disp + Snd]

or [Sound] and [Vol. Settings] is set to [ ] (Mute).

5

Changing Camera Settings

173