Ricoh GR Digital II manual Changing the Auto Power Off Setting Auto Power Off, 175

Changing the Auto Power Off Setting (Auto Power Off)

If you do not operate the camera for a set period of time, it shuts off automatically to conserve battery power (Auto Power Off).

By default, auto power off is set to one minute, but you can change this setting.

Available Settings

Off (Auto Power Off is turned off) 1 Min. *Default setting

5Min.

30Min.

To change the auto power off setting, follow the steps below.

1Display the setup menu.

• For the operating procedure, see P.156.

2Press the " button to select [Auto Power Off] and press the $ button.

3Press the !" buttons to select the desired setting.

4Press the MENU/OK button, or press the # button and then the MENU/OK button.

Note ----------------------------------------------------------------------------------------------

•To continue using the camera after auto power off turned the camera off, press the POWER button to turn the camera on again. You can also press and hold the 6 (Playback) button for more than one second to turn on the camera in playback mode.

•Auto power off does not work when the camera is connected to a computer or printer.

•When using interval shooting, the [Auto Power Off] setting is not valid and auto power off does not work.

5

Changing Camera Settings

175