Ricoh GR Digital II manual 177

Displaying Information When the Picture Display is Off (Info Disp)

When [Info Disp] is set to [On], information is displayed on the picture display in the following cases even when the picture display is turned off in shooting mode (GP.56). (Only information, not the shooting screen, is displayed.) This is useful when using the external viewfinder.

•When the t (Self-timer) button or N (Macro) button is pressed.

•When the mode dial setting is switched.

•When the up-down dial is rotated.

•When the ADJ. lever is pressed to the left or right during manual exposure mode (GP.79).

•When [AF/MF], [AF/Snap], [JPEG>RAW], [Color>B&W], or [Color>TE] is set in [Function Button] (GP.164) and the Fn (Function) button is pressed.

•When the F (Flash) OPEN switch is pressed to open the flash.

After the information is displayed and operations are performed for several seconds, or when the shutter release button is half-pressed, the information display disappears and the picture display turns off again.

1Display the setup menu.

• For the operating procedure, see P.156.

2Press the " button to select [Info Disp] and press the $ button.

3Press the !" buttons to select [On].

4Press the MENU/OK button, or press the # button and then the MENU/OK button.

5

Changing Camera Settings

177