Ricoh GR Digital II manual Changing Image Confirmation Time LCD Confirm, 176

5

Changing Camera Settings

Changing Image Confirmation Time (LCD Confirm.)

Immediately after you press the shutter release button and take a still image, the image taken is displayed on the screen for a moment so you can check it. By default, the image confirmation time is set to 0.5 second, but this can be changed.

Available Settings

Off (Image not displayed for confirmation)

0.5Sec. *Default setting 1 Sec.

2 Sec.

3 Sec.

Hold (The image remains displayed until the next time you half-press the shutter release button.)

To change the image confirmation time, follow the steps below.

1Display the setup menu.

• For the operating procedure, see P.156.

2Press the " button to select [LCD Confirm.] and press the $ button.

3Press the !" buttons to select the desired setting.

4Press the MENU/OK button, or press the # button and then the MENU/OK button.

Caution------------------------------------------------------------------------------------------

When [LCD Confirm.] is set to [0.5Sec.], symbols such as the battery mark may remain on the picture display while the image is displayed.

Note ----------------------------------------------------------------------------------------------

When [LCD Confirm.] is set to [Hold], the displayed image can also be enlarged (GP.51) or deleted (GP.52).

176