Problem

Cause

Solution

Refer to

The image is too bright.

The light intensity of the flash is

Adjust the light intensity of the

P.109

 

not appropriate.

flash. Alternatively, move a little

 

 

 

away from the subject or

 

 

 

illuminate the subject with

 

 

 

another light source instead of

 

 

 

using the flash.

 

 

Subject is overexposed.

Correct the exposure.

P.120

 

 

Decrease the exposure time.

P.79

 

The brightness of the picture

Adjust the brightness of the

P.160

 

display is not appropriate.

picture display.

 

The image is too dark.

The shot was taken in a dark

Open the flash.Use the F (Flash)

P.44

 

place while set to flash off.

button to cancel flash off.

 

 

The subject is underexposed.

Correct the exposure.

P.120

 

 

Increase the exposure time.

P.79

 

The brightness of the picture

Adjust the brightness of the

P.160

 

display is not appropriate.

picture display.

 

The image lacks natural

The picture was shot in conditions

Add a white object to the

P.122

color.

that made it difficult for auto white

composition or use a white

 

 

balance to adjust the white

balance mode other than [AUTO].

 

 

balance.

 

 

The date or recording

Display is set to no symbol

Press the DISP. button to change

P.56

information does not

display.

the display.

 

appear on the screen.

 

 

 

The brightness of the

You are using AF in a dark place

This is normal.

-

picture display changes

or when the auto focus range and

 

 

during AF.

surrounding brightness are

 

 

 

different.

 

 

There is a vertical smear

This is a phenomenon that occurs

This is normal.

-

on the image.

when a bright subject is shot. It is

 

 

 

called the smear phenomenon.

 

 

The level indicator is not

[Level Setting] is set to [Off] or

Set [Level Setting] to [Display] or

P.173

displayed.

[Sound].

[Disp + Snd].

 

 

The display is set to a setting

Press the DISP. button to change

P.56

 

other than normal symbol display

the display to normal symbol

 

 

or histogram.

display or histogram.

 

 

The camera is upside down

Hold the camera correctly.

-

 

(shutter release button is on the

 

 

 

bottom).

 

 

The image is tilted even

You shot the image while moving,

Shoot in an environment that is

-

though it was shot with

such as on a amusement ride.

not moving.

 

the level indicator in the

The subject is not level.

Check the subject.

-

middle or while the level

 

 

 

sensor sound was

 

 

 

sounding.

 

 

 

Appendices

7

215

Page 217
Image 217
Ricoh GR Digital II manual 215