Ricoh GR Digital II manual Set Function Button to ColorB&W or ColorTE on the setup menu

1

Various Shooting Functions

Switching from Color to Black-and-White or Black-and-White (TE) Mode (Color>B&W, Color>TE)

Assigning the Fn (Function) button to [Color>B&W] or [Color>TE] (GP.164) and then pressing the Fn button with [Img Set] set to a setting other than [B&W] or [B&W (TE)] allows you to switch from [Color] to [B&W] or [B&W (TE)]. Pressing the Fn button again returns to color mode.

1Set [Function Button] to [Color>B&W] or [Color>TE] on the setup menu.

•For the operating procedure, see P.164.

2With the camera ready to shoot, press the Fn button.

•The setting switches to [B&W] or [B&W (TE)] and an orange symbol is displayed on the screen.

•Pressing the Fn button again returns to color mode.

Caution------------------------------------------------------------------------------------------

When [Img Set] is set to [B&W] or [B&W (TE)] (GP.105, 106), pressing the Fn button does not switch to color mode.

Note ----------------------------------------------------------------------------------------------

•Turning off the camera after switching to [B&W] or [B&W (TE)] returns the setting to color mode.

•You can also use the shooting menu to make the color setting. (GP.105, 106)

76