Ricoh GR Digital II manual F4.0

1

Various Shooting Functions

•When the exposure value is in the range of -2EV to +2EV, the brightness

of the picture display changes	+2EV
according to the exposure value.

•When the exposure value exceeds the range of -2EV to +2EV, the indicator lights orange and the brightness of the picture display does not change.

-2EV

2 Rotate the up-down dial to	M
change the aperture value.
3 Press the ADJ. lever to the left		F4.0
or right to change the shutter		1/80
speed.

4Half-press the shutter release button.

5Gently press the shutter release button all the way.

Note ----------------------------------------------------------------------------------------------

•To increase the exposure time, lower the shutter speed. In this case, camera shake may occur. Hold the camera steady with two hands or use a tripod when shooting.

•While shooting with a slow shutter speed, the picture display turns off.

•When the ISO setting is set to [Auto] or [Auto-Hi] in manual exposure mode, the ISO is fixed at ISO 100. (GP.126)

•When [Zoom Button] on the setup menu is set to [Expo. Cmp], the exposure compensation setting screen is not displayed even if you press the 8/9 buttons in manual exposure mode. When the 8/9 buttons are pressed, the value is automatically set closer to the appropriate exposure (closer to the center of the exposure value indicator). This is useful when, for example, you want to change/ adjust the exposure value from closer to the center of the exposure value indicator (the appropriate exposure).

•The AE lock does not work in manual exposure mode even if the Fn (Function) button is assigned to [AE Lock]. When the Fn button is pressed, the value is automatically set closer to the appropriate exposure (closer to the center of the exposure value indicator). This is useful when, for example, you want to change/adjust the exposure value from closer to the center of the exposure value indicator (the appropriate exposure).

Caution------------------------------------------------------------------------------------------

	When the shutter speed is set to 15 or more seconds, the function to remove noise from
	images operates. Therefore, the time until image recording is complete is about twice the
80	set shutter speed.