Ricoh GR Digital II manual Shooting, This section

If you are using the camera for the first time, read

Shooting

The shutter release button works in two steps. When you press the shutter release button halfway (Half-press), the auto-focus function is triggered to determine the focal distance. Next, press it all the way down to shoot. When your subject is not in the center of your composition, compose your photo after focusing. (Focus Lock)

1 Press the POWER button to turn the camera on, and turn the mode dial to 5.

2 Put the subject of your photo in the center of the screen and press the shutter release button halfway.

this section.

•The camera focuses on the subject and the exposure and white balance are fixed.

•If automatic focusing fails, a red frame is displayed in the center of the picture display and the auto focus/flash lamp blinks green.

•The focal distance is measured at a maximum of nine points. Green frames appear to indicate the positions that are in focus.

Auto Focus/Flash Lamp

Frame

38