Changing the Operation Sound Setting (Operation Sounds)

The following five operation sounds are made during camera operation.

Start sound

: Sound when the camera is turned on.

Shutter release

: Sound when the shutter release button is pressed.

sound

 

Focus sound

: Sound when the shutter release button is half-pressed and the

 

camera focuses on the subject.

Beep sound

: Error sound indicating an operation that cannot be performed.

Level sensor sound

: When [Level Setting] is set to [Sound] or [Disp + Snd] (GP.173),

 

the sound is continually emitted at a set interval when the camera is

 

level in shooting mode.

 

 

Available Settings

Description

All *Default setting

All sounds on

Shutter

Shutter release sound, beep sound, and level sensor sound.

To change the operation sound setting, follow the steps below.

1Display the setup menu.

• For the operating procedure, see P.156.

2Press the " button to select [Operation Sounds] and press the $ button.

3Press the !" buttons to select the desired setting.

4Press the MENU/OK button, or press the # button and then the MENU/OK button.

Note ----------------------------------------------------------------------------------------------

The operation sound setting can be changed. (GP.172)

5

Changing Camera Settings

171

Page 173
Image 173
Ricoh GR Digital II manual 171, Changing the Operation Sound Setting Operation Sounds