If you are using the camera for the first time, read this section.

Note ---------------------------------------------------------------------------------------------------

Press the shutter release button gently to prevent camera shake.

The Jsymbol indicates that camera shake may occur. Hold the camera still and focus the camera again.

The flash fires a pre-flash to increase the AE accuracy.

You can set the time the still image you have taken appears on the picture display. You can also make settings to have the image remain displayed until the shutter release button is half-pressed or not to display the image after shooting. (GP.176)

The aperture value is controlled up to F11 in auto shooting mode. (When the aperture value is between F7.1 and F11 in auto shooting mode, the aperture and internal ND filter are used together.)

40

Page 42
Image 42
Ricoh GR Digital II manual