Ricoh GR Digital II manual Loading the Battery and SD Memory Card, Insert the rechargeable battery

Loading the Battery and SD Memory Card

The rechargeable battery (DB-60) can be used to power this camera. This battery is convenient because the battery power lasts long and it can be used over and over again by recharging. If the camera is already turned on, make sure it is turned off before loading the battery and card.

1	Slide the release lever toward
	OPEN to open the battery/card	1
	cover.
2		2
	Make sure the SD memory card

is facing the right way and then push the card all the way in until it clicks.

• The rechargeable battery may be inserted first.

3 Insert the rechargeable battery.

• Press the latch with the battery and insert the battery all the way into the battery compartment.

•When the rechargeable battery is

loaded in place, it is locked with the latch.

4 Close the battery/card cover and slide the release lever in the opposite direction of OPEN to

lock it in place.	1
	2

If you are using the camera for the first time, read this section.

31