Ricoh GR Digital II manual 214

Appendices

7

Problem	Cause		Solution	Refer to
The picture is blurred.	You moved the camera when		Hold the camera with your elbows	P.36
	pressing the shutter release		pressed against your body.
	button.		Use a tripod.
	When shooting in a dark place		Use the flash.	P.44
	(such as indoors), the shutter		Raise the ISO setting.	P.126
	speed slows down and pictures
	become easily blurred.
The flash does not fire or	The flash is not open.		Slide the F (Flash) OPEN switch	P.44
the flash cannot charge.			down to open the flash.
	The flash cover is not fully raised.		Do not press or cover the flash	P.44
			cover.
	The flash cannot be used in the		To shoot with the flash, change	P.44
	following cases:		the settings or mode.	P.110
	• When auto blacket, white			P.112
		balance bracket, or color		P.114
		bracket is set		P.99
	•	In multi-shot mode		P.129
	•	In movie mode
	The flash is set to flash off.		Open the flash. Use the F(Flash)	P.44
			button to cancel flash off.
	Battery is exhausted.		Charge the rechargeable battery	P.30
			or use the AC adapter. Replace	P.31
			the alkaline batteries with new	P.225
			batteries.
Even though the flash	The distance to the subject is		Get closer to your subject and	P.44
fired, the picture is dark.	greater than 3.0 m (9.8 ft).		shoot.
	The subject is dark.		Adjust the light intensity of the	P.109
			flash.
	The light intensity of the flash is		Adjust the light intensity of the	P.109
	not appropriate.		flash.
	The flash cover is not fully raised.		Do not press or cover the flash	P.44
			cover.

214