Belkin F1DS102U, F1DS104U Installing the KVM Switch Base, Dimensions, Weight, Warranty 5 years

OVERVIEW

Specifications

Part No.: F1DS102U, F1DS104U

Power: 9V DC, 1A AC adapter (required)

PCs Supported: 2 (F1DS102U), 4 (F1DS104U)

Monitor Supported: VGA and SVGA MultiSync, LCD

Max Resolution: 2048x1536@85Hz

Keyboard Input: USB

Mouse Input: USB

USB Device Ports: 2

Audio Input/Output: 3.5mm jack (stereo)

Microphone Input/Output: 3.5mm jack

VGA Port: 15-pin HDDB type

LED Indicators: 2 (F1DS102U), 4 (F1DS104U)

Enclosure: high-impact plastic

Dimensions:

F1DS102U

6.75 (h) x 4.25 (w) x 7.75 (d) inches

F1DS104U

7.75 (h) x 4.75 (w) x 9.5 (d) inches

Weight:

F1DS102U 1.5 lbs.

F1DS104U 2.0 lbs.

Operating Temp: 32° to 104° F

Storage Temp: -4° to 140° F

Humidity: 0-80% RH, non-condensing

Warranty: 5 years

Note: Specifications are subject to change without notice.

STEP-BY-STEP INSTALLATION GUIDE

This section provides complete instructions for the hardware setup of a single KVM Switch. (F1DS102U, F1DS104U)

Installing the KVM Switch Base

Hold the main housing with one hand and the base with the other.

With the narrow part of the base facing toward the rear of the housing, align the hooks of the base to the base holes located underneath the housing. Put the hooks through the holes and push the base toward the front of the housing to lock the base into place. Please refer to diagram for assistance.

8 9