Fujitsu PQ42-1, PQ50-1, VQ40-1 manual Select inputs, Settings for PC DVI, Operator control

Eliminate flickering and distortions.

To close the menu press the red button.

Press the [MENU] button to open the main menu.

Operator control

V Pos.

S Sets the vertical picture position [A] / ["].

V Size

S Sets the vertical picture size [A] / ["].

H Pos.

S Sets the horizontal picture position [A] / ["].

H Size

S Sets the horizontal picture size [A] / ["].

Phase

S

S

Settings for PC (DVI)

S

S With the button [Y] or [B] select the <Display> menu and press the button ["].

S Select <Overscan> [Y] / [B] and press the button ["].

Overscan

S Switch <Overscan> on and off [A] / ["]

As soon as the option Overscan is switched on, the edge of the picture is cut by approx. 10 %. Any faults on the edge of the picture are eliminated or made non-visible by this cutting facility.

S To close the menu press the red button.

Select inputs

For the selection of an input use the selection menu <Inputs>.

S Press the button [SOURCE] or [F4] to open the se- lection menu <Inputs>.

S Select input [Y] / [B] and then press the red button.

Downloaded28 From TV-Manual.com Manuals ENGLISH