Fujitsu PQ42-1 Connection of external devices, Connection to SCART1 / SCART2, Operator control

Select <Inputs> [Y] / [B] and press the button ["].

Press the [MENU] button to open the main menu.

Operator control

Connection of external devices

Connection to SCART1 / SCART2

External devices such as the following can be connec- ted to SCART1 and SCART2: DVD player, DVD recor- der, video recorder, set top boxes and camcorders.

In addition SCART1 has the facility to connect RGB sources.

In addition SCART2 has the facility to connect YC sources.

If you have selected the input SCART1 or SCART2 with the [VIDEO] button, you can effect the settings described below.

S

S With the button [Y] or [B] select the <Setup> menu and press the button ["].

S

S Select the desired menu option (function) with the button [Y] or [B].

S Select the setting [A] / ["].

S To close the menu press the red button.

TV SCART

This function must be On, if automatic switching-over to the corresponding SCART input is to take place when the set is switched on to SCART1 or SCART2.

SCART1 RGB IN

S SCART: if a switch voltage is pending at pin 16 from an external device, the LCD/plasma TV switches over automatically to the pending RGB signal. Otherwise a CVBS signal is reproduced.

S Always: reproduction of an RGB signal only

S Unused: reproduction of a CVBS signal only

SCART2 YC IN

S Always: reproduction of a YC signal

S Unused: reproduction of a CVBS signal

FILM Mode

This function detects whether the broadcast picture material is an original cinema film and optimizes the picture quality. This function is deactivated as stan- dard. To activate this function, set the menu option <FILM Mode> to On.

This function is especially recommended if using a DVD player.

Format detection

Select the signal (level) for format detection. Two options are available for selection:

S Switch voltage

Evaluation of the signal to pin 8 of the SCART sok- kets.

S Software

Detection of letterbox films on the basis of the black bars at the top and bottom.

16 : 9 format (effective only for the format Auto Zoom!)

The menu option <16 : 9 format> is active only if the switch voltage is set under the menu option <Format detection>.

S Letterbox: Picture is stretched horizontally and ver- tically to full screen.

S Anamorphic: Picture is stretched horizontally only to full screen.

ENGLISH

DownloadedENGLISHFrom TV-Manual.com Manuals 25