Fujitsu PQ50-1 Connection to the HDMI input, Connection to the PC DVI-I input, Operator control

Connection to the HDMI input

HDMI

Signal

Connection to the PC DVI-I input

PC (DVI)

Signal

PC (RGB)

Signal

Settings for PC (RGB)

Operator control

The LCD/plasma TV is equipped with an HDMI input for digital video and audio signals.

Connect an HDMI-compatible device, e.g. a DVD player or a set top box with an HDMI output socket, to the HDMI input.

SPress the button [F4] to open the selection menu <Inputs>.

SSelect input [Y] / [B] and then press the red button

(M).

You can also select the HDMI input by means of the [VIDEO] button.

Signal:
640 x 480 @ 60 Hz
480i, 576i, 480p, 576p, 720p, 1080i
HDMI (RGB, YUV) sound 2 channels up to 48 kHz
DVI (RGB), sound via digital COAX IN	ENGLISH
For the connection of a PC use the input PC DVI-I.
If your PC has a digital DVI output, use a DVI cable for
connection.
If your PC has an RGB output (DSUB 15), use a DVI
adapter cable on a DSUB for the connection.

SPress the button [F4] to open the selection menu <Inputs>.

SSelect input [Y] / [B] and then press the red button

(M).

You can also select the PC inputs by means of the [PC] button.

SPress the [MENU] button to open the main menu.

SWith the button [Y] or [B] select the <Setup> menu and press the button ["].

SSelect <Inputs> [Y] / [B] and press the button ["].

Auto Setup

SPress the button ["] to start Auto setup.

This function will now attempt to find the optimal pic- ture settings for the pending signal. During setting the picture will move slightly back and forth.

H Total

SYou can correct the scanning frequency for the PC picture here. This function is intended only for com- petent users.

DownloadedENGLISHFrom TV-Manual.com Manuals 27