Fujitsu PQ50-1, PQ42-1 manual Operator control, Switching on / off, Channel change programme change

Operator control

Operator control

Switching on / off

S To switch on the LCD/plasma TV press the [POWER] button on the remote control or the button

		/MENU on the set.
		The indicator Power On / Standby lights up blue on the
		LCD/plasma TV.
		S To switch off the LCD/plasma TV press the
		[POWER] button on the remote control.
		The indicator Power On / Standby lights up orange on
Indication on operation (Power On) (blue)		the LCD/plasma TV.
		If a signal is pending at any input, the LCD/plasma TV
Indication when on standby (orange)
		is switched automatically to standby mode after a
IR sensor for remote control	/MENU
		waiting period.
Channel change (programme change)
		S Select TV mode by pressing the [TV] button on the
		remote control.
		With the buttons [PY] / [PB] on the remote control:
		S Press the button [PY] to increase the channel num-
		ber.
		S Press the button [PB] to reduce the channel
		number.
		With the buttons [0...9] on the remote control:
		Select the channel number directly by pressing the
		buttons [0...9].
		With the channel overview in the OSD menu:
		S Press the button [LIST] on the remote control to dis-
		play the channel overview on the display.
		S Select a channel with the buttons [BY " A] on
		the remote control.
		S Press the red button to close the channel overview.

Channel information

Volume and sound settings

With the buttons [VOL "] / [A VOL] on the remote control:

S Press the button [VOL "] to increase the volume. S Press the button [A VOL] to reduce the volume.

Downloaded12 From TV-Manual.com Manuals ENGLISH