Fujitsu PQ42-1 manual Connection of an aerial, Insertion of the batteries into the remote control

Open the cover of the battery component.

Connection of an aerial

S If you would like to connect cable or a terrestrial aerial, use the ”AERIAL” socket provided for this purpose.

Insertion of the batteries into the remote control

S

S Insert the two batteries (AAA) supplied into the battery compartment.

Pay attention to the polarity (+) and (-) marked on the bottom of the battery compartment.

S Close the cover of the battery compartment.

Using the remote control

Use the remote control within a distance of about 6 m from the remote control sensor on the LCD/plasma TV and within a horizontal and vertical angle of 30°.

The remote control may not work, if the remote control sensor of the LCD/plasma TV is exposed to direct sun- light or strong artificial light.

30° 30°

Connecting the mains cable

S Insert the mains cable into the mains input socket on the LCD/plasma TV and the mains plug into a mains outlet.

S Switch the mains switch on the rear side of the LCD/plasma TV to position ”I”. The LCD/plasma TV is now in standby mode and can be switched on with the remote control.

Downloaded10 From TV-Manual.com Manuals ENGLISH