Fujitsu PQ50-1 manual OSD menu control, Basic settings, Automatic channel search, Operator control

Press the [MENU] button to open the main menu.

Operator control

OSD menu control

The performance of settings in the OSD menu is described in detail below.

S Press [MENU] to display the main menu on screen.

S With the button [Y] or [B] select a menu option and press the button ["].

S Repeat this procedure until the desired menu option is reached.

Selected menu options are marked with a blue bar. Menu options with a further submenu or that can be executed directly are marked by .

S With the buttons [A] / ["] select the desired option or a parameter and press the [MENU] button.

S Press the [MENU] button to return to the previous menu.

S If you want to close the OSD menu, press the red button.

In each menu those buttons that you can use for control are displayed in the bottom section.

Basic settings

Automatic channel search

S

S With the button [Y] or [B] select the <Setup> menu and press the button ["].

S Select <Tuner> with the button [Y] or [B] and press the button ["].

S Select the menu option <Auto Search> [Y] / [B] and press the button ["].

S Select the country [A] / ["].

S Select <Search form> [Y] / [B].

S Select the search form [A] / ["].

You can select between two possibilities:

All channels and new channels.

S Select <Start search> [Y] / [B] and press the button ["].

ENGLISH

DownloadedENGLISHFrom TV-Manual.com Manuals 15