Sharp LC-46LE831E TV start-up time setting, Quick start, Individual setting PIN, Parental rating

Basic adjustment

TV start-up time setting

View setting

Quick start

You can reduce the TV’s start-up time after turning on the power with the remote control unit.

Go to “Menu” > “Setup” > “View setting” > “Quick start”.

	Item
On	The TV quickly starts up from standby.
	14 W or more of power consumption is
	required during standby.
Off	Power consumption is small during
	standby.

Individual setting - PIN

View setting

PIN

Allows you to use a PIN to protect certain settings from being accidentally changed.

Go to “Menu” > “Setup” > “View setting” > “Individual setting” > “PIN”.

NOTE

•PIN input is required when executing “PIN”. The default PIN is “1234”. To reset the PIN setting (PIN input will no longer be needed), refer to Reset the PIN (Page 74).

EWhen selecting “Yes”

Register a four-digit number to use the “PIN” function.

1Press c/dto select “Yes”, and then press ;.

2Enter the four-digit number as a PIN using 0_9 numeric buttons.

3Enter the same four-digit number as in step 2 to confirm.

•“The system PIN has been changed successfully” displays.

4Press ;.

NOTE

•As a precautionary measure, make a note of your PIN and keep it in a safe place that children cannot reach.

•“0000” cannot be set as the PIN code.

•To view a locked channel, you must enter the PIN (see pages 38 and 39 for locking channels from viewing in DTV, SAT and ATV mode). When you select a locked channel, a PIN prompt message pops up. Press 6to display the PIN input window.

View setting

Parental rating

This function allows DTV services to be restricted. It prevents children from watching violent or sexual scenes that may be harmful.

1Go to “Menu” > “Setup” > “View setting” > “Individual setting” > “Parental rating”.

2Repeat steps 1 to 4 in when selecting “Yes” to the left.

NOTE

•“Universal viewing” and “Parental approval pref.” are ratings used exclusively in France.

•Refer to page 81 for details about ratings.

Individual setting - Time

View setting

Time display

Go to “Menu” > “Setup” > “View setting” > “Individual setting” > “Time display”.

Time display

This function allows you to display the clock time in the lower-right corner of the screen.

	Item
On	Displays the clock time.
On (half-hourly)	Displays the clock time in
	30-minute increments.
Off	Hides the clock time.

Time format

You can select the time format (either “24HR” or “AM/PM”) for the clock time.

40