Enjoying 3D image viewing
You can enjoy
NOTE
• Some menu items are greyed out in 3D mode. This is not a malfunction.
Preparing for the 3D glasses
Confirm how to use the 3D glasses before watching
Supplied accessories for 3D glasses
3D glasses ( x 1) | 3D glasses band * ( x 1) | Nose pad * |
|
| (large × 1, small × 1) |
Pages 65l67 | Page 67 | Page 67 |
Glasses case ( x 1) | Cleaning cloth ( x 1) | Precision screwdriver |
|
| (phillips × 1, slotted × 1) |
Page 66
* Use the 3D glasses band and nose pad for children as needed.
Before using the 3D glasses
Before using the 3D glasses for the first time, remove the insulating sheet attached to them.
Part name
1 |
| 5 | 6 |
3 | 4 |
| |
|
| ||
| 2 |
|
|
|
|
| 7 |
1Service terminal
•This terminal is for service use only. Do not connect any other device to this terminal.
2Infrared receiver
•Receives an infrared signal sent from the TV. The 3D glasses turn off automatically after three minutes if no signal is received from the TV.
3POWER 3D/2D (Power button)
•Press for at least two seconds to turn on and off the 3D glasses.
•When the 3D glasses are turned on, pressing this button switches between 2D and 3D modes.
4LED light
•Blinks three times when the power is turned on.
•Blinks two times when 2D mode is selected.
•Blinks three times when 3D mode is selected.
•Blinks six times when the battery power is low.
•Lights for two seconds when the power is turned off.
5Nose pad mount
•The dedicated nose pad can be mounted here (Page 67).
6Battery case
73D glasses band mount
•The dedicated 3D glasses band can be mounted here (Page 67).
NOTE
•Do not soil or apply stickers or other obstacles to the infrared receiver. Doing so may block signals from the TV and prevent the 3D glasses from working correctly.
•Interference from other infrared communications equipment may prevent you from viewing 3D images correctly.
65
