Sharp LC-40LE830E, LC-40LE830RU, LC-40LE831E, LC-40LE831S, LC-46LE830E, LC-46LE830RU, LC-46LE831E, LC-46LE831S Quick guide

9

Operation overview

Follow the steps below one by one when using the TV. Some steps may not be

necessary depending on your TV installation and connection.

1. Preparation - Connecting the TV

p

r

s

q

o

n

• Place the TV close

to the AC outlet, and

keep the power plug

within reach.

• Product shape varies

in some countries.

Plug the standard DIN45325 plug (IEC 169-2) 75

q coaxial cable.

Connect the satellite antenna cable.

Insert a CA card into the CI slot to watch

scrambled broadcasts (Page 11).

Plug in the AC cord.

Bundle the cables with the tie.

Check that the MAIN POWER switch on the rear

of the TV is turned on (;).

*Important information:

Satellite services are only available for the 830 model series.

2. Preparation - Setting the TV

Turn on the power using <a on the TV (Page 19).

Run the initial auto installation (Pages 14).

wLanguage setting

wHome/Store setting

wCountry setting

wChannel search setting

• Digital search

−Terrestrial

−Cable

• Analogue search

• Satellite search

Start searching channels

Congratulations!

Now you can watch TV.

• If necessary, adjust the antenna to attain maximum signal reception (Page 18).

Quick guide

Contents

Main Page Dear SHARP customer Contents Introduction [ ENGLISH ] Important safety precautions Caring for the cabinet Caring for the front panel 3D glasses (3D glasses are sold separately) WARNING Supplied accessories Optional accessories Preparation Attaching the stand unit 1Confirm that there are screws with the stand 46 inch models 40 inch models 2Attach the supporting post for the stand unit Using the remote control unit Inserting the batteries Preparation 1Open the battery cover. 2Insert the two supplied LR03 (AAA size alkaline) 3Close the battery cover. Note on disposing batteries Part names and functions TV (front view) TV (rear view) TV (rear view) continued WARNING Remote control unit Part names and functions Quick guide 3. Watch TV - Daily operation 1 2 analogue broadcast 3 Inserting the CA card into the CI module 1Carefully insert the CI module in the CI slot with 2The logo on the CI module must be facing Using the Menu screen 1Display the Menu screen 2Select an item 3Exit the Menu screen About the guide display Using Software keyboard Use the software keyboard when you need to input text. Char.Set Caps Done Cancel SP Delete Clear Cursor Left Caps Char.Set Cursor Right Initial auto installation Initial auto installation Confirm the following before turning on the power 1Press <a on the TV. 2Setting the OSD language. Digital broadcast setting 1Press a/b to select 2 Press a/b/c/d or 3Press a/b to select Search start, and then 4Press c/d to select Yes to start searching Searching for satellite broadcasts (830 series only) 1When you change the antenna connection setting: 1Press a/b to select Single satellite, and then 2Press a/b to select SAT1 [None] to display 3Press a/b/c/d to select your favorite 7Press a/b to select OK, and then press ;. 2 When starting the satellite search after setting the scrambled stations: 1Press c/d to select Start search, and then 2The TV searches for and stores all the receivable 1Press c/d to select Change setting, and then Checking signal strength and channel strength (DVB-T/T2*1/C/S*2/ S2*2) 1Go to Menu > Setup > View setting > 2Press c/d to select On, and then press ;. 2Press a/b to select Digital setup or Satellite 3Press a/b to select Signal strength, and then Watching TV Daily operation Switching on/off 1Turn on (;)/off (a) the MAIN POWER switch on 2To turn on/off the TV, press <a on the TV Switching between digital, satellite* and analogue broadcasts Selecting a sound mode Channel display DTV mode ATV mode SAT mode 1Select a TV channel (the time information is EPG Useful settings for using EPG EPG Display range setup Genre icon setup Selecting a programme using EPG Timer setup using EPG 1Press EPG. 2Press a/b/c/d to select the programme you 5Press c/d to select Yes, and then press ;. 3Press c/d to select Watch, and then press 4Press c/d to select Yes, and then press ;. Connecting external devices Video connections HDMI connection n op DVI/HDMI conversion 1Press b to select HDMI 2 from the INPUT menu, and then press 2Go to Menu > Setup > Option > Terminal setting > Audio 1Press b to select HDMI 2 from the INPUT menu, and then press o Component cable (commercially available) Audio cable (commercially available) VIDEO connection AV cable (commercially available) Audio connections Speaker/amplifier connection o AQUOS LINK Controlling HDMI devices using AQUOS LINK AQUOS LINK connection Connecting an AQUOS BD player/AQUOS recorder via the AQUOS AUDIO speaker system HDMI-certified cable (commercially available) Connecting an AQUOS BD player/AQUOS recorder only HDMI-certified cable (commercially available) Optical audio cable (commercially available) AQUOS LINK setup AQUOS LINK control 2Press c/d to select On, and then press ;. Auto power on Selecting recorder 1Press a/b to select Top menu/title list, and 2Press @ to hide the menu screen to 3Select the title with a/b/c/d, and then press Setup menu Media change Basic adjustment Picture settings Go to Menu > Setup > Picture. AV mode OPC Advanced C.M.S.-hue C.M.S.-saturation C.M.S.-value Colour gamut range Monochrome Range of OPC Audio settings Go to Menu > Setup > Audio. Auto volume Audio adjustment You can adjust the sound quality to your preference with the following settings. Power save settings ECO picture control Energy save No signal off No operation off View settings Auto installation 1Go to Menu > Setup > View setting > 2Press c/d to select Yes, and then press ;. 3Press a/b/c/d to select the desired 4Press a/b to select the broadcast standard Satellite setting (830 series only) Analogue setting Fine Colour sys. Sound sys. Label TV start-up time setting Quick start Individual setting - PIN PIN 1Press c/d to select Yes, and then press ;. 2Enter the four-digit number as a PIN using 0_9 Individual setting - Language Digital audio language Subtitle Selectable items Language Useful viewing functions Optional features settings Go to Menu > Setup > Option. Selecting the picture size manually Wide mode 4:3 mode WSS signal 4:3 screen 4:3 mode Normal 4:3 mode Panorama Terminal setting Audio select Skipping specified inputs Input select 1Press b to select the input source for setting 2Go to Menu > Setup > Option > Terminal Input label 1Press b to select the desired input source Channel selecting effect Programme title display Adjusting image position Position Additional features Illumination Game play time Key lock Other useful features Using a USB device USB usage 3Press c/d to select Yes, and then press ;. Connecting a USB device Time shift 1Press READY. 2Press I. Buttons for time shift operation Display information regarding time shift The time shift ready icon shows up when The status icon shows up depending on what The grey bar shows how much memory is in This blue point shows how much time has FULL shows up when the grey bar reaches Device registration Device check USB media/Home network USB media/Home network Selecting the mode Common operation Select USB media or Home network from the INPUT menu to enter this mode. Another way to select the mode Viewing enlarged photos Buttons for enlarged photo display operation Slide show Buttons for slide show BGM select operation * The mode selected in Folder display setting ESlide show Music mode Buttons for music mode Video mode Buttons for file selecting operations Buttons for playing mode DivX setup USB device compatibility Home network server compatibility Selecting the picture size for video mode You can select the picture size in Video mode. Connecting a PC Connecting a PC HDMI connection HDMI-certified cable (commercially available) 3.5 mm stereo Adjusting the PC image automatically Auto sync. 1Press b to select PC from the INPUT 2Go to Menu > Setup > Option > Terminal Adjusting the PC image manually PC compatibility chart PC control of the TV Communication conditions for IP IP Control setup nop 1Go to Menu > Setup > View setting > Command list Network setup Connecting to the network Wired installation PC Router (commercially available) ETHERNET cable (commercially available) Network ETHERNET cable (commercially available) PC Wireless LAN router/access point Wireless LAN USB adapter (supplied) Network Network setup 1Switch on your router before starting the E W Net TV What is Net TV? DISCLAIMERS Operations in Net TV Basic operation Option menu Inputting texts Clear Net TV memory Video store SD card 1Insert the SD card into the SD CARD (VIDEO Disclaimers and software licences for Net TV Net TV DISCLAIMERS This product includes the Opera browser. Enjoying 3D image viewing Preparing for the 3D glasses Supplied accessories for 3D glasses (AN-3DG10-S/R/A), sold separately Before using the 3D glasses Part name Replacing the button cell battery 1Loosen the screw used to secure the battery 2Remove the button cell battery. 3When the battery comes loose from the socket, 4Hook a new button cell to the metal latch and Angle of the 3D glasses Operating range Attaching the nose pad Attaching the nose Removing the nose Display format for 3D and 2D images Viewing 3D images Receiving a 3D image signal that can be detected automatically 1Go to Menu > Setup > Option > 3D 2Turn on the power of the 3D glasses, and then Switching 3D to 2D mode Watching 2D images in 3D 1Press 3D. 2Press c/d to select 2D s 3D, and then press 3Turn on the power of the 3D glasses, and then Switching to the previous mode 1Press 3D. 3D setup 3D auto change 2D s 3D convert effect 3D still image effect setting 3D still image effect adjustment Specifications 3D Glasses (sold separately) Information Troubleshooting - 3D Images Page Appendix Troubleshooting Reset the PIN 1Go to Menu > Setup. 2Press a/b to select Auto installation, Programme setup, PIN, Parental rating or Reset, and then press ;. The PIN input window will display. Updating your TV via DVB-T/T2* Download setup Searching for updates* Downloading the software 1If the software is updated, the confirmation Information on the software licence for this product Software licence Updating your TV via USB/network Software update 1Go to Menu > Setup > Information > Trade marks Specifications Specifications (Wireless LAN USB adapter) Environmental specifications Mounting the TV on a wall Rating table for child lock Abbreviation list 82 Dimensional drawings Dimensions do not include protrusions such as screws and some parts. LC-46LE830E LC-46LE830RU LC-46LE831E LC-46LE831S LC-40LE830E LC-40LE830RU LC-40LE831E LC-40LE831S