10.If you make an error use either the Back key on the remote control to delete the character entered, or give a long press on the Select control. Use the left and right arrows to move the block cursor to access incorrectly entered characters.
11.After the final character of the WEP or WPA key has been entered, locate the 'END' symbol and press the Select control. (The 'END' symbol is located between the punctuation symbols and the numbers 0 - 9.) The radio should now be able to connect to the network.
()~ |
|
| ◄ ►01 |
| END | ||
|
| PASSWORD█ | |
Connecting to
network
Network OK
After you have connected to your network |
| |
1. Once connected to your radio to the network (and therefore also to | Radio Stations | |
the Internet) it will display the main Mode menu. This menu provides | ||
Media Player | ||
access to all major functions of the radio. There are also buttons on | ||
Auxiliary input | ||
the remote control for each of the Mode menu options except for the | ||
Alarm clock | ||
Configure menu. | ||
| Configure |
Off | |
|
2.Rotate the Select control until the 'Off' option is highlighted on the display.
3.Press the Select control to put the radio in Standby mode. It should then display the time. This time is obtained by the radio using its Internet connection. If the time display is not correct don't worry at this stage. It can easily be adjusted later, see page 41, 'Setting the clock'.
9:30AM
If you need any further advice, please call our Technical Helpline on :- | 14 | |
020 8758 0338 | ||
|
