Roberts Radio WM201 manual General, Specifications Circuit features

Models: WM201

1 64
Download 64 pages 2.35 Kb
Page 59
Image 59

General

Do not allow your radio to be exposed to water, steam or sand. Do not leave your radio where excessive heat could cause damage.

The name plate is located on the rear of the radio.

The radio shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the radio.

It is recommended to operate the product such that there is a minimum distance (10cm recommended) to adjacent objects in order to ensure good ventilation.

The ventilation of the product should not be restricted by covering it with items such as newspapers, tablecloths, curtains etc.

No naked flame sources such as lighted candles should be placed on the product.

It is recommended to avoid using or storing the product at extremes of temperature. Avoid leaving the unit in cars, on window sills, in direct sunlight etc.

Specifications

 

 

Circuit features

 

Power Requirements

 

 

Loudspeaker

2 x 75 mm

Mains

AC 230 volts, 50Hz

only

 

 

Battery (Remote control)

CR2032

 

Output Power

5 Watts RMS per channel

Connectivity

 

 

Headphone socket

3.5mm dia

Wired Ethernet

10/100M bits/sec via RJ-45

Auxiliary In socket

3.5mm dia

Wi-Fi

802.11b and 802.11g supported

Line Out socket

3.5mm dia

 

WEP and WPA encryption supported

 

 

 

 

 

Aerial System

External Wi-Fi Antenna

The Company reserves the right to amend the specification without notice.

If you need any further advice, please call our Technical Helpline on :-

58

020 8758 0338 (Mon-Fri)

 

Page 59
Image 59
Roberts Radio WM201 manual General, Specifications Circuit features