Roberts Radio WM201 Network Configuration, Configuring the radio only to use a Wi-Fi connection

Models: WM201

1 64
Download 64 pages 2.35 Kb
Page 52
Image 52

Network Configuration

This menu enables you to configure your radio’s network settings, scan for

 

Radio Stations

 

Media Player

a connection to an alternative wireless network, or to manually configure

 

 

Auxiliary Input

the network parameters. This can be useful if you take the Internet radio

 

to another location where there is a different network setup.

1,2

Alarm Clock

 

 

Configure

Off

It is possible to configure your radio to connect to your network via an available Ethernet connection (RJ-45) or via a Wi-Fi router.

Configuring the radio only to use a wired Ethernet connection

1.From the radio’s Network Configuration menu, select 'Wired / Wireless'. This menu will present you with three options: 'Wireless Only', 'Wired Only' and 'Auto'. Selecting 'Wired Only' will allow cause the radio to restart and then to use only its Ethernet connection to communicate with the network. The radio will also disable its wireless network capabilities. This will require your radio to be physically connected to a wired Ethernet using the RJ-45 socket on the rear panel.

Configuring the radio only to use a Wi-Fi connection

2.Selecting the 'Wireless Only' option from the 'Wired / Wireless' menu will allow cause the radio to restart and then only to use only its Wi-Fi connection to communicate with the network. The radio will also disable its Ethernet connection.

Aux Input Level

Backlight

Language

Clock Setup

Network

Register

Version

Scan for networks Enter network name View Config

Edit Config

Wired/Wireless

Signal Warning

<< Back

Auto

Wired Only

Wireless Only

<< Back

51

Page 52
Image 52
Roberts Radio WM201 Network Configuration, Configuring the radio only to use a Wi-Fi connection, Wired/Wireless, Wired Only