Factory reset

If you wish to completely reset your radio to its initial state this may be performed by following this procedure.

1.Use the Select control to switch on your radio and to access the menus. If needed, use the Back option to access the main Mode menu. Rotate the Select control until 'Configure' is highlighted on the display.

2.Press the Select control to enter the Configure menu. Rotate the Select control until 'Factory Reset' is highlighted on the display.

3.Press the Select control again and the display will show 'Are you sure?'. Rotate the Select control to highlight 'Yes' if you wish to carry out a system reset or highlight 'No' if wish to return to the previous screen. Then press the Select control again.

4.A full reset will be performed, the station list together with any preset stations will be erased and your wireless network connection details will be lost. All configuration settings will be restored to their defaults, and the language used for menus will be reset to English.

In the event that you are unable to access the menus (or if the language setting has accidentally been changed to a language that you cannot understand) the Factory Reset may also be performed as follows:

1.Remove all power from the unit and wait 30 seconds.

2.Then, re-apply power while simultaneously pressing and holding the front panel rotary control. Keep this pressed as the radio powers up and until it displays 'Factory Reset Complete'. This should normally only take between 10 and 15 few seconds. Then, release the control while the radio restarts.

3.If this is not successful, please remove power for one minute, and then repeat the operation.

1-3

2

Radio Stations

Media Player

Auxiliary input

Alarm clock

Configure

Off

Register

Version

Upgrade Firmware

Factory Reset

<<Back

Are you sure?

YES NO

Factory Reset

Complete

55

Page 56
Image 56
Roberts Radio WM201 manual Factory reset, Off Register Version Upgrade Firmware, Factory Reset, Back Are you sure?