Kenmore 790.7946 manual Setting Oven Controls

Setting Oven Controls

*Continuous Bake or Twelve Hour Energy Saving Mode

*Timer

Setting Continuous Bake or 12 Hour Energy Saving

The TIMER _i_'oe_and FLEX CLEAN @ pads control the Continuous Bake or t 2 Hour Energy Saving features. The

oven control has a factory preset built-in 12 Hour Energy Saving feature that will shut off the oven if the oven control is left

on for more than 11 hours and 59 minutes. The oven can be programmed to override this feature for Continuous Baking.

INSTRUCTIONS PRESS DISPLAY

To set the control for Continuous Bake or 12 Hour

Energy Saving features:

t.Press and hold _o_ for 6 seconds or until the control beeps

once. (Fig.t). "12h" or "- - h" will appear in the display and the control will beep once.

2.Press _C_aXnto switch between the t 2 Hour Energy Saving and

continuous bake features. Note: "12h" (See Fig. 2) in the display indicates the control is set for 12 Hour Energy Saving

feature and % - h" (See Fig. 3) indicates the control is set for the Continuous Bake feature.

3. Press to accept the change (See Fig. 4) display will

return to time of day) or press (_) to reject the change.

Setting Timer

for 6 seconds

Fig. 1

@

Fig. 2

Fig. 4

,4:----,,,,

The TIMER _oer/) pad controls the Timer feature. The Timer serves as an extra reminder in the kitchen that will beep when

v

the set time has run out. The Timer will not START or STOP the cooking process. The Timer feature may be used during any of the other oven control functions. Refer to "Minumum & Maximum Control Pad Settings" on page 18 for time amount settings.

INSTRUCTIONS PRESS DISPLAY

To set the Timer (example for 5 minutes):

1.	Press	_.	(See	Fig. 5).
2.	Press	the number pads to set the desired			time in the display	Fig. 5
	(example (5)).		Press ST_,,_ . The timer will begin a count
	down. (See Fig. 6).
	Note: If _		is not	pressed the timer will	return to the time of	Fig. 6

day.

3.When the set time has run out, the clock will sound with 3 long beeps every 5 seconds until ('_sier)ois pressed (See Fig. 7).

To cancel the Timer before the set time has run out:		@	Fig. 7
Press _.	The display will return to the time of day.

16