Before You Call

Solutions to Common Problems

Before yeu call for service, review this list. it may save you time and expense. The list includes common occurrences that are not the result of defective workmanship or materials in this appliance.

OCCURRENCE

POSSIBLE

CAUSE/SOLUTION

Range is not level.

Poor installation.

Place oven rack in center of oven. Place a level on the oven rack. Adjust

leveling legs at base of range until the oven rack is level.

Be sure floor is level and is strong and stable enough to adequately support range.

If floor is sagging or sloping, contact a carpenter to correct the situation.

Kitchen cabinet alignment may make range appear unlevel. Be sure cabinets are square and have sufficient room for range clearance.

Cannot move appliance easily. Appliance must be accessible for service,

Cabinets not square or are built in too tightly. Contact builder or installer to make appliance accessible.

Carpet interferes with range. Provide sufficient space so range can be lifted over carpet.

Oven control beeps and displays any F code error (for example FI 1).

Surface burners do not light.

Surface burner flame burns half way

around.

Surface burner flame is orange.

Electronic control has detected a fault condition. Press STOP to clear the display and stop beeping. Reprogram oven. If fault recurs, record fault number. Press STOP and call

1-800-4-MY-HOME® for assistance (See back cover).

Surface

Control

knob

has not

been

completely turned to LITE.

Push in and turn the

Surface

Control

knob

to LITE

until

burner ignites and then turn

control knob to

desired

flame

size.

 

 

 

...........

Burner ports are clogged. With the burners OFF, use a small-gauge wire or needle to clean ports. See Cleaning the Cooktop Contoured Well Areas, Burner Caps, Burner Heads & Grates in the General Care & Cleaning section for complete instructions.

Range power cord is disconnected from outlet (electric ignition models only). Be sure cord is securely plugged into the outlet.

Electrical power outage (electric ignition models only). Burners can be lit manually. See Setting Surface Controls.

Burner ports are clogged. With the burner OFF, clean ports by using a small-gauge wire or needle.

Moisture is present after cleaning. Lightly fan the flame and allow burner to operate until flame is full. Dry the burners thoroughly and follow instructions under Cleaning the Cooktop Contoured Weft Areas, Burner Caps, Burner Heads & Grates in the General Care & Cleaning section.

Dust particles in main line. Allow the burner to operate a few minutes until flame turns blue.

In coastal areas, a slightly orange flame is unavoidable due to salt air.

Oven does not operate.

No electrical power to the appliance. See steps under Entire Appliance Does Not Operate in the "Before You Calf' checklist (this section).

Be sure the oven controls are set correctly for the desired function. See Setting Oven Controls or Entire Appliance Does Not Operate (see below).

Entire appliance does not operate,Make sure power cord/plug is plugged correctly into outlet. Check household circuit breakers.

Service wiring is not complete. Call 1-800-4-MY-HOME® for assistance (See back cover).

Oven light or lights do not work.

Power outage. Check house lights to be sure. Call your local electric company for service.

Burned-out or loose bulb. See Changing the Oven Lights in the General Care & Cleaning section for complete instructions.

37

Page 37
Image 37
Kenmore 790.7946 manual Before You Call

790.7946 specifications

The Kenmore 790.7946 is a versatile, high-performance gas range designed to cater to a wide array of cooking needs, making it an ideal choice for both novice cooks and professional chefs alike. One of its standout features is its spacious oven capacity, which provides ample room for multiple dishes to be prepared simultaneously. This is particularly beneficial during holiday gatherings or family meals, where time efficiency is key.

Equipped with a powerful convection oven, the 790.7946 ensures even cooking by circulating hot air around the food. This technology not only speeds up cooking times but also enhances browning and crisping, resulting in perfectly baked pastries and roast dishes. The oven includes a variety of cooking modes, such as bake, broil, and specialty settings like pizza and steam bake, offering users flexibility and precision in their cooking.

The range features multiple sealed burners on the cooktop, providing a variety of heat outputs that can accommodate both delicate simmering and high-temperature searing. With adjustable flame settings, users can control the heat intensity according to their specific cooking needs. The cast iron grates are not only aesthetically pleasing but also durable, allowing for easy movement of pots and pans across the surface.

Another notable characteristic of the Kenmore 790.7946 is its sleek design, which includes a stainless steel finish that complements modern kitchen aesthetics. The range also possesses convenient storage options, with a built-in drawer that can hold cookware and other cooking essentials, keeping the kitchen organized.

Safety is a top priority in the design of the 790.7946, as it includes features such as automatic shut-off and a robust, secure oven door that locks during self-cleaning cycles. Cleaning is made simpler with the self-cleaning option, which utilizes high temperatures to eliminate food residue and grease from the oven interior, giving users more time to enjoy cooking rather than cleaning.

Overall, the Kenmore 790.7946 combines advanced cooking technologies with user-friendly features, making it a reliable, efficient, and stylish addition to any kitchen. Whether you're baking, roasting, or simmering, this gas range provides the tools necessary to make every culinary endeavor successful.