Kenmore 790.7946 manual Self-Cleaning, Instructions, Press, Display

Self-Cleaning

Setting Flex Clean

Setting Delay Flex Clean

INSTRUCTIONS PRESS DISPLAY

When the Self=Clean cycle is done:

1.The time of day, "DOOR LOCKED" and "CLEAN" icon will remain in the display.

2.Once the oven has cooled down for approximately 1 HOUR, and the "DOOR LOCKED" icon is no longer displayed, the oven door can then be opened.

Stopping or Interrupting a Self-Cleaning cycle:

If it becomes necessary to stop or interrupt a Self-Cleaning cycle

duel.Press@.t°excessive smoke or fire in the oven:		@
2. Once the oven has cooled down for approximately 1	HOUR and
the "DOOR LOCKED" icon is no longer displayed,the	oven door	Fig.7
can then be opened (See Fig. 7).

IMPORTANT NOTES when using the Self-Clean feature:

1.The Self-Clean feature will not operate whenever a radiant surface remains ON.

2.A Self-Clean cycle may be started if the appliance has the Cooktop Lockout active. A Self-Clean cycle cannot be started if Oven Lockout feature is active.

3.If a Self-Cleaning-Cycle has started but not finished and a power failure occurs, the appliance may not have thoroughly cleaned. After the door unlocks and power has been restored, set for another Self-Cleaning cycle.

4.If your clock is set for normal 12 hour display mode the Delay Self-Clean cycle can never be set to start more than 12 hours in advance. To set for Delay Flex-Clean 12-24 hours in advance see page 19 for instructions to set the control for the 24 hour time of day display mode.

32