Kenmore 790.7946 manual Setting Oven Controls

Setting Oven Controls

•Setting the Clock

•Changing between 12 or24 hourdisplay

•Silent Control Operation

Setting the Clock

The CLOCK _'_ pad is used to set the clock. The clock		may be
set for 12 or 24 hour time of day operation. The clock has been
preset at the factory for the 12 hour operation. When the range is
first plugged in, or when the power supply to the range has been			Fig. 1
interrupted, the timer in the display will flash with power failure "PF"
(See Fig. 1).	INSTRUCTIONS	PRESS	DISPLAY

To set the clock (example below for 1:30):

1.Press . "CLO" will appear in the display (See Fig. 2).

2,	Press _)(_(_)	pads to set the time	of day to 1:30
	(See Fig. 3). Press _.	"CLO" will disappear	and the clock
	will start (See Fig. 4).

Fig. 2

Fig. 3

Changing between 12 or 24 hour time of day display:
1. Press and hold _'-_ for 6 seconds untill "12h" or"24h"	_"QOfor 6 seconds	Fig. 4

appears in the display.

2.	Press _cc_,-_ to switch		between the 12 and	24 hour time of day	@
	display. "12h" or "24h" will be displayed (See Figs. 5 or 6).
3.	Press _	to accept	the desired change	or press @ to
				v
	reject the change.

4.Reset the correct time as described in To set the clock above. Please note that if the 24 hour time of day mode was chosen, the clock will now display time from 00:00 through 23:59 hours.

Fig. 5

Fig. 6

Setting Silent Control Operation

The DELAY START (,,,_)and FLEX CLEAN (,,c_a_ pads control the Silent Control operation feature. The Silent Control

v

operation feature allows the oven control to be operated without sounds or beeps whenever necessary. If desired the control can be programmed for silent operation and later returned to operating with all the normal sounds and beeps.

INSTRUCTIONSPRESS

To change control from normal sound to silent control operation:

1.To tell if your range is set for normal or silent operation press

and hold	_ss_,_ for 7 seconds.	(See Fig. 7)	for7seconds
2. Press _	to switch between	normal sound operation and	@

v

silent operation mode. The display will show either "SP" (See Fig. 8) or" - -" (See Figs. 2 or 3).

If "SP" appears (See Fig. 2), the control will operate with normal sounds and beeps. If" - -" appears (See Fig. 9), the control is set for silent operation mode.

3. Press _ to accept the change or press @ to reject the _or@

change.

DISPLAY

Fig. 7

Fig. 8

Fig. 9

15