SETTING UP THE TRANSMITTER
Place the transmitter near your television set or
PUTTING THE TRANSMITTER INTO OPERATION
Use the supplied cable to connect socket on the TI 380 transmitter with the headphone socket on your television set or
NOTE
If your television set does not have a headphone socket, the sound signal can also be taken from the SCART socket (video recorder socket). Please order the suitable Sennheiser adaptor (Cat. no. 47874) from your Sennheiser dealer.
Connect the supplied
LEVEL CONTROL OF THE TRANSMITTER
Adjust the volume of your
PUTTING THE RECEIVER INTO OPERATION
Insert the BA 151 accupack into the compartment in the headphone receiver.
Take special note of the instructions on accupack operation on pages 20/21 of this manual!
(NB: The BA 151 accupack must be charged for 24 hours before first use!)
SWITCHING ON THE HEADPHONE RECEIVER
Use switch to turn on the headphone receiver. Adjust the volume with control . The balance control serves to compensate for volume differences between the left and right channel.
16 | 17 |