2:30 h | 15 h |
| |
0:40 h | 7.5 h |
|
Putting the headset into operation
Charging the headset battery
A complete charging cycle takes about 2 hours and 30 minutes. Before using the headset for the first time, charge the rechargeable battery for a complete charging cycle without interruption.
1.Take off the headset and switch it off (see page 14).2.Place the headset into the magnetic holder of the headset charger.3.Connect the USB plug of the charging cable to the USB socket of your com- puter, the corresponding USB car charger (optional accessory) or power supply unit (optional accessory).
4.The battery is being charged. The LED flashes depending on the battery charge level. After 30 seconds, the LED goes off. Press the
1 | 2 |
2s
OFF
3 |
| 4 |
|
|
| LED flashes | Meaning |
| * | 1x | below 1 hour talk time |
|
| ||
| * | 1x | 1 to 2 hours talk time |
|
|
| |
|
| 2x | 2 to 4 hours talk time |
| * | 3x | 4 to 10 hours talk time |
|
|
| |
|
| 4x | above 10 hours talk time |
|
| *not included | 100 % |
When the battery charge level drops below 15 minutes of talk time, the LED flashes red and the voice prompt “Recharge headset” is announced several times. When the battery is flat, the headset switches off automatically.